Machine description
Line for cutting hot-rolled sheet and etched sheets ACW 3
Maximum strength of cut strips max 700 MPa.
Develop:
Inner diameter of the coil min. 500 mm – max without restrictions (overlays)
Outer diameter of the coil max. 1900 mm – for coils with a width of 1450-1600 mm; max. 2100 mm – for coils with a width of less than 1450 mm
Weight of the vertebra max. 10 tons (without support), 30 tons (with support) (07.12.21 scrolled circle 2.11x1477 (150) weighing 34.240 t.)
Circle width max. 1600 mm for cutting (1620 mm for scrolling)
Compensating pit:
Depth 6 m
Cut:
Line equipped with a guillotine for leveling the sheet face
Cutting head with shafts with a diameter of 230 mm
Sheet thickness min. 1.2 mm, recommended thickness min 1.50 mm
Sheet thickness max. 4,5 mm for sheet plate gat. S235 and l
